BEVINSEE 10 Rows Oil Cooler Kit For VW Golf 7 GTI/R 2013-2020

Higher output from 2.0 TSI engines generates more heat, which can reduce oil lubrication. The BEVINSEE 10-row oil cooler kit helps manage rising oil temperatures without overcooling—keeping your engine running smoothly and reliably.

Features:

• 【Lowers Oil Temperature by 10–15°C】Excess heat can cause engine oil to thin and lose its protective properties. Bevinsee air to oil cooler mounts at the front of the vehicle where it gets direct air, helping reduce oil temperatures by around 10–15°C.Maintain steady oil temperatures on track, or during fast road use.
  
• 【Improve the fixing method】Three fixed points paired with four buffer pads effectively reduce the impact of vehicle jolts on the oil cooler during aggressive driving.
  
• 【Protects Factory Coolant Hoses】Reduces interference between added oil cooler lines and the factory coolant hoses. The kit includes heat-resistant sleeves to minimize the impact of oil temperature on coolant hoses.
  
• 【Integrated Thermostatic】When oil temperature reaches 82°C (180°F), the thermostat opens to direct oil to the cooler. At 92°C (198°F) or higher, the valve fully opens, allowing all oil to flow through the cooler.
  
• 【3 Layer Reinforced Oil Lines】Nylon braided outer layer with a weave of stainless steel and PTFE inner lining for strength and durability.

Specifications:

• Brand: BEVINSEE
  
• Type: Oil Cooler Kit
  
• Condition: New
  
• Surface Finish: Anodized
  
• Activation Temp：180°F/82℃    
  
• Full Flow Temp：198°F/92℃   

NOTE:
1.After installing the kit, noise may occur, but this is harmless. The noise is similar to a "whirring", which can be caused by the pulsation of the oil through the lines.
2.Before refitting the oil filter connection piece centre stem, ensure that you have the newest version (VW part number: 06L-115-678-Q). This was an update from VW, so a majority of cars will have it fitted already, 
but please check as failure to change to the new version could result in reduced oil pressure.
3.Be sure to watch our installation video before installing; the installation process will take about an hour.
4.After installing an oil cooler, an additional 500-600ml of engine oil is required.
5.Not suitable for installation on vehicles that have already been modified with a front mount intercooler, as the FMIC already occupies the mounting position
6.Recommended oil filter model: W 610/6. The factory paper oil filter cannot be used

Fitment:
For VW For GOLF MK7 GTI 2013-2020 
For VW For GOLF MK7 R 2013-2020 

Disclaimer:
Bevinsee Store parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Porsche, Subaru, Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet, GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury, Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi, Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo, Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn, Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram, Rover, Skoda, Healey, Mini, Smart, Scion, Renault, Seat, Peugeot, Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat, Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special Vehicles, Hyundai, Trabant, Citroën, Freightline, etc.