Home » Aluminum Jack Pad Set For BMW E90 E92 E8X F30 F31 F32 F33 F20 F80 M3 M4 Z4 Supra A90

Aluminum Jack Pad Set For BMW E90 E92 E8X F30 F31 F32 F33 F20 F80 M3 M4 Z4 Supra A90

In stock
SKU: 9121201401
(49)
$100.99
Color
Status

Pickup available at Bevinsee

Usually ready in 24 hours

About Bevinsee

Limited Quantity Now, Don't Miss It

The factory plastic jack pads are easily ruined and damaged during. If the jack is not placed properly, the subframe can be subjected to undue stress or even cause the jack to slip off the jack pivot due to a structural failure of the factory jack pad, which can pose a significant safety risk to DIY car enthusiasts.

Features:

  • 【Higher Quality】CNC machined from aircraft grade billet aluminum for high precision and strength.
  • 【Direct Replacement】Can be permanently attached to the car, no more worrying about picking out adapters or jacks.
  • 【Design Upgrade】Specially designed to be taller than stock parts to allow room for modifications to aftermarket side skirt extensions.
  • 【Anodized Finish】Premium appearance, rust-resistant and super durable.
  • 【Easy to Install】Easily mounts on with custom hardware mounted to the chassis

Specifications:

  • Brand: BEVINSEE
  • Condition: Brand new
  • Type: Jack Pad
  • Material: Billet Aluminum
  • Processing: CNC-machined
  • Surface Finish: Anodized
  • Item Include: 4x Jack Pad
  • Replacement parts number：51 71 7 164 761，51 71 7 169 981，51 71 7 123 311，51717123311，51717169981，51717164761, 51717237195

 

Fitment:
For BMW 1 Series    E81/E82/E88             2005-2013
For BMW 1 Series    F20/F21                    2012–2019
For BMW 2 Series    F22/F23                    2012-2015
For BMW 3 Series    E90/E91/E92/E93      2005-2013
For BMW 3 Series    F30/F31                   2012-2019
For BMW 4 Series    F32/F33/F34/F36      2013-2020  
For BMW 5 Series    E60/E61                   2004-2010 
For BMW 5 Series    F10/F07                   2010-2016
For BMW 6 Series    F12/F06                   2012-2017
For BMW 7 Series    F01/F02                   2007-2015
For BMW X1 Series  E84                          2010-2015
For BMW X1 Series  F48                          2016-2020
For BMW M2 Series F87                          2016-2018
For BMW M3 Series E90/E92/E93            2006-2013
For BMW M3 Series F80                          2012-2018
For BMW M4 Series F82/F83                   2014-2020
For BMW M5 Series F90                          2016-2019

For Toyota Supra 2020-current

Disclaimer:

Bevinsee parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Porsche, Subaru, Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet, GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury, Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi, Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo, Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn, Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram, Rover, Skoda, Healey, Mini, Smart, Scion, Renault, Seat, Peugeot, Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat, Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special Vehicles, Hyundai, Trabant, Citroën, Freightliner, etc.

Customer Reviews

Based on 49 reviews
92%
(45)
8%
(4)
0%
(0)
0%
(0)
0%
(0)
100.0
C
Chad Hansen
Same as the other brands

Amazing product. I was very surprised on the quality.

C
Chad Geiger
Product as described

These are very similar to the Versus jack pad set. Installation is pretty straight forward and requires minimal tools (allen key provided for install). Can install without having to raise the vehicle up, but does make the process a bit slower. The locking part that goes into the frame of the vehicle is not the easiest to aligh or have lock into place since these are flat, would be much easier if these locking plates were a bit wider and notched to sit snuggled up into the frame, and would help them from turning as you are trying to tighten the jack pad down without also turning the unseen locking plate as it is being installed.

B
Birdman33
Definitely a worthwhile upgrade.

There is no slippage, align the lock position, tighten the screw with a screwdriver, and test it repeatedly with a crane 5 times without any problems.

C
Codi Vinson
As it said

Received the package 10 days later, and the build quality was worth the price paid. The worn-out plastic washer went straight to the trash.

R
Rapheal
Few mins installation, great support

Pay attention to the direction of the lock when installing and tighten the screws. There is no problem at all. I don't understand why some people on the forum say to use fixing fluid, it is completely unnecessary.

123