Feature：
- Copper Plate Chip,Increase 100% Heat Conduction,Protect LED Chips,Extend Lifespan
- 9000 rpm Fan To Accelerate Heat Dissipation,Increase 80% Heat Dissipation Than Others
- Cooling system: Fan Cooling + Lamp Body Cooling System
- Integrated built-in drive
- ALL IN ONE Aviation Aluminum Cooling Bulb Body
- 360-degree adjustable lamp body chuck can help to get a better light pattern
- Plug and play, easy to install
- Adopted opening high speed cooling fan design, less noise and better heat dissipation.
- 2 sides emitting ensure for the better beam pattern and brightness.
- Customized latest CSP chips ,light efficiency increased by 25% comparing with ordinary chip, better temperature resistance, lumens up to 5000LM/bulb, lifespan Over 50,000 hours.
- Our LED light come with exactitude light beam angle, no dazzling, no influence for the coming driver at left in front, improve brightness and distance.
Two-way heat dissipation channel1.All-in-one aluminum profile as heat conduction system,360 degree heat radiating2.High speed mute fan(12000R/Min),high Air flow for faster cooling rate
Fitment
for Mercedes Benz B Class/E class/ML Class/CLA/GLA/GLS/GLE...(Low Beam)
for VW Touareg (Low Beam)
for Skoda Fabia 2 Combi (10/07 - 12/14)
for Skoda Octavia II/A5 2004.3-2012.9
for Skoda Superb MK2(B6,3T,2008–2015)
for Ford Explorer 1991-
for Opel Vectra C 2003
for Chery Riich G5 / Cross
for Saab Automobile D50 / X55 / X25 / X65
Specification
- Plug Type: H7
- Power: 30W/bulb
- Luminous Flux: 10000lm/set(5000lm/bulb)
- Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
- Color Temperature: Pure White 6000K
- Beam Angle: 360 degree beam angle
- Material: Aviation 6063 aluminum profile
- Operating Temperature: -40-80 degree Celsius
- Waterproof Rated: IP67
- Life Span: Above 50,000 hours
Package Included:2 x H7 LED Headlight Bulbs2 x Adapted Sockets
Important Notice:
Most Europe Make Car Will Need To Install The Resistor to cancel the erro code/icon, You May Need Professional Installation.(NORMALLY OF BMW/VW/VOLVO/BENZ/AUDI/OPEL/Skoda.....)
And the main function of our Can-bus products is to solve the led headlight bulbs flicker after installed,not to solve the erro code/icon situations.
if need helps,email us via ebay message,we will provide professional advise,please understanding!!!
How To Confirm whether can-bus is needed?
This item wasn't exist self-decoding/self-Canbus【anti-flashing/anti-warning】function and DRL【Daytime running light】 function!!!
-- After installing the LED bulbs, the Vehicle needs to be decoded in the following cases:
1, the headlight light is flashing, strobe or indefinitely flashing(Electrolytic capacitor decoding may worked).
2, the on-board computer(ECU) reports an error, the central control panel displays an error icon or displays bulbs burns out error message.(Resistance decoding may worked)
3，The bulbs does not work. What you can do is connect the bulbs to12V DC ,it can work normally(Resistance decoding may worked).
situation 1: use this case to judge whether it need to be decoded.
situation 2:use this case to judge whether is a reverse polarity plug(turn bulb's plug 180° to insert into headlamp and turn on to test)
Feasible Solution:
1, install the decoder; the decoding rate of the decoder on the market is about 90%, can not completely decode all models, the turnover rate is larger.
2, install the resistor, you need professional installation.
3, using ODM to read the error information code of the ECU on-board computer, through programming means, correct/delete the error information to achieve the decoding effect.
